How to hire a commercial gas engineer?

If you are aiming to pay the commercial gas safe engineer only for the number of days he/she works at the home in question rather than a quote then this isn’t really a great idea unless it is being done at an extremely low-cost rate. The reason it isn’t really a good idea for a commercial gas engineer to work on a day rate is due to the fact that he/she might only do 4 hours work, where if there was a quote of a days rate in question. It is in the advantage of the engineer to work at an excellent rate and surface previously however without jeopardizing the quality of the work included.

Here are the tips for hiring a gas engineer:

* A gas engineers days work is based upon an 8-hour day, however, when providing a quote for a days work, the engineer might be completed within say 5 to 6-hours or if the commercial gas engineer in question brings his apprentice or colleague, then the job may be done within 3 to 4-hours. If a commercial gas engineer quotes for a week of work, however, does the job within the 2 to 3 days, this could be due to co-workers, possibly approximately 2 working alongside him/her.

* When arranging a quote on the gas engineers fitting service, it is an excellent idea to find reputation and facility. A big company would be found to be costly and more sensible when it concerns a higher quote, where a commercial gas engineer just starting off with not as much experience would be found to be cheaper. A gas engineer who charges lower rates is found to be more of a threat, where a larger business that has a fantastic track record has more to lose by maintaining the track record may sometimes be an excellent idea to go with. Most of the times, you spend for exactly what you get, but in some places from time to time, exactly what we may see as a high quote but with a high-risk factor, might be classed has the commercial gas engineer being too pricey.

* You have to ensure regularly that anyone that works on any gas appliance in your house is Gas Safe Registered Engineer.
The Gas Safe Register replaced the CORGI for gas fitters and offers you the customer reassurance that the person in your home is certified and safe. Genuine Gas Safe Registered engineers have to carry regularly a Gas Safe ID card with them. Remember to check the front of the Gas Safe ID card to verify identity and check the back of the gas card to see what the engineer is certified to do. Lots of people do not realize that different gas appliances require different credentials.

* It is imagined that the successful Engineer will be carrying out service works, breakdown service and installation on heating systems and plumbing work in the key sites, such as manufacturing plants, domestic properties and a majority of the work on oil based heating systems for livestock on farms.

* It is vital that the Commercial Gas Engineer has existing Domestic and Commercial Gas Credentials, consisting of COCN1 or CODNCO1 and CCN1. LPG will be helpful. NVQ in Plumbing also useful.

* The gas safety regulation is not just for commercial gas engineers to follow; it puts responsibilities on landlords and on us too. Landlords have to get their properties gas safety inspected every year and get gas appliances that they supply regularly serviced. If tenant brings gas appliances into a rented home, they have to make sure they are maintained and safe to use.

Get an commercial gas engineer from £145 p/h.

Gas Safe Register

Gas Safe Register is the main gas authorizing body for the UK, Isle of Man and Guernsey, designated by the appropriate Health and Safety Executive for each area. By law, all gas engineers who carry out any gas work must be registered with the Gas Safe Register.

On 1st April 2010, Gas Safe replaced CORGI (The Council for Registered Gas Installers ) as the gas registration body in Northern Ireland and Guernsey and Great Britain and the Island of Man on 1st April 2009.gas-safe-uk

Who operates Gas Safe Register?

Gas Safe Register is operated by Ancillary Solutions Limited and Capita Gas Registration a division of Capita Plc.

Why you should use gas safe engineers:

  • By law, the engineer must have to be on the Gas Safe Register website to carry out gas work in the UK, Island of Man and Guernsey. For more information, please visit gas safe register website.
  • If someone other than from a Gas Safe Engineer does the gas work in your dwelling, you could be jeopardizing the safety of your family and your home. Poorly fitted and partly serviced gas appliances can cause carbon monoxide gas poisoning, gas leaks, fires and explosions.
  • Gas Safe Register controls the register of businesses and operatives who are qualified to undertake both liquefied petroleum gas (LPG) and natural gas work in Great Britain, Northern Ireland, the Island of Man and Guernsey. Under the Gas Safety Regulations 1998 for a gas engineer to carry out gas work legally that is within the scope of the Gas safety Regulations they should be on the Gas Safe Register.
  • The performance of the Gas Safe is measured against a series of KPI’s ( Key Performance Indicators) that keep an eye on the key aspects of delivery of the scheme, such as customer awareness of gas safety risk, engineer and consumer satisfaction with the service fulfilled by the gas safe register and the targeting of the scheme’s efforts in the areas where it will have the biggest impact. The KPI’s are kept track of regular basis, with yearly targets, and there are legal and financial associations if the Gas Safe fails to date the objectives set.
  • Gas Safe Register is here to help keep you and your family safe. We encourage you to trust the triangle– it’s a sign your gas engineer can work on your gas appliances safely.
  • Gas safe register engineers will often have a range of certifications that allow them to perform particular kinds of gas work. It is very important to check what work they are qualified to do before you use them.
  • All registered gas engineers bring a Gas Safe ID card. They have a different licence number that you can use to check they are still on the register. You can inspect online or call on 0800 408 5500.

  • When a gas meter is installed, the engineer should have the suitable level of knowledge and must also be registered with Gas Safe. In addition to these obligations, the organisation or engineer should be an Ofgem Approved Gas Meter Installer (OAMI) for the relevant category of meter works (COP1c,COP1a and COP1c) – this excludes Northern Ireland.
  • New engineers and businesses with no previous history or those returning to the gas industry who had a history of complaints or a record of risky gas work will subject to a time limited probationary period. During that duration, they will be required to report all gas work they perform so it can be reviewed by a Gas Safe Register Inspector.

Keep your home safe. Get your gas cooker, fire safety and boiler tested every year and get them serviced routinely by a Gas Safe registered engineer. Set a warning so you remember at Stay Gas Safe. Call Gas Safe Register today.